4.7

Out of 2 Ratings

Owner's of the Mackie Music Mixer ProFX8 gave it a score of 4.7 out of 5. Here's how the scores stacked up:
  • Reliability

    5.0 out of 5
  • Durability

    4.5 out of 5
  • Maintenance

    5.0 out of 5
  • Performance

    5.0 out of 5
  • Ease of Use

    4.0 out of 5
of 36
 
4
ProFX8 and ProFX12
ProFX8 and ProFX12
Introduction
Thank you for choosing a Mackie professional ProFX
mixer. It is equipped with our rather lovely microphone
preamps, an internal FX processor, and a USB port for
playing and recording 2 channels of audio using a com-
puter. The ProFX8 has 8 channels and the ProFX12 has
12 channels. Apart from this difference, the mixers are
identical and this manual covers both models.
At Mackie, we know what it takes to be roadworthy.
After all, our mixers have traveled all over the world,
often under the worst of conditions, and we’ve applied
what we’ve learned to the mechanical design of our
ProFX mixers.
Reliability is paramount to sound reinforcement.
That’s why our engineers have subjected our mixers to
the most rigorous and fi endish tests imaginable to fi ne-
tune the design, and extend its limits beyond those of
ordinary mixers.
Features
The ProFX8 mixer has 8 channels (2 mono, 2
hybrid, 1 stereo)
The ProFX12 mixer has 12 channels (4 mono, 2
hybrid, 2 stereo)
Mono channels have a mic input and a mono
line-level input, with a gain control and level
set LED for adjustment of mic and line gain
Hybrid channels have a mic input and stereo
line-level inputs, with a gain control and level
set LED for adjustment of mic gain
Stereo channels have stereo line-level inputs,
with a gain control to adjust the line gain
+48V phantom power can be applied to all mics
Tape/CD stereo RCA inputs and outputs
1/4" TRS insert jacks on mono channels
Channel 1 hi-z switch allows direct connection
of a guitar or bass without a DI box
Low cut switch on mono and hybrid channels
3-band EQ on each channel
Aux monitor control on each channel
Aux FX control on each channel
Each channel has a pan control, mute switch,
overload (OL) LED, and fader
Stereo return has mute, OL LED and fader
XLR and 1/4" TRS main stereo line outputs
1/4" TRS stereo return
1/4" TRS FX send and monitor send
1/4" TRS stereo headphones output
• Headphones level control
Tape input level control
16 built-in Running Man effects with input
level, OL LED, preset display, FX to monitor
level, and footswitchable mute/unmute
7-band graphic EQ can be used for main mix, or
monitor mix, or bypassed
12-segment stereo output meters on main mix
Break switch mutes all channels except tape
input and USB input
Faders for stereo return, FX return, monitor
and main
USB connection allows 2-channel computer
recording and 2-channel computer playback
USB thru switch and input level
How To Use This Manual
The fi rst pages after the table of contents are the
hookup diagrams. These show typical setups for fun
times with your ProFX8 or ProFX12 mixer.
Next is a detailed tour of the entire mixer. The de-
scriptions are divided into sections, just as your mixer is
organized into distinct zones:
Rear Panel: The AC input, power switch, XLR
line-level outputs and USB I/O
Connection Section: The upper section, where
you connect microphones and guitars etc.
Channel Controls: The channel strips where
you adjust and control each channel
Master Controls: The section on the right, with
graphic EQ and main level controls
Stereo Effect Processor
Throughout these sections you’ll fi nd illustrations
with each feature numbered and described in the
nearby paragraphs.
This icon marks infor mation that is critically
important or unique to the mixer. For your own
good, read them and remember them.
This icon will lead you to some explanations of
features and practical tips. Go ahead and skip
these if you really need to go.
Appendix A: Service information.
Appendix B: Connectors.
Appendix C: Technical information.
Appendix D: USB information.